The Anarchs

CNX Software

cnx-software.com ↗ · Maker & DIY · English · şimdi önce güncellendi

Kendi akışınızı oluşturmak için forum hesabınızla giriş yapın.

  1. 20 Kasım Cuma
  2. GUITION ESP32-S31 development kit features 7-inch capacitive touch display, Ethernet port

    CNX Software Maker & DIY

    After the Waveshare ESP32-S31-Touch-LCD-4.3C and VIEWE PLCM-UES31S043H800V480C-U, the GUITION JC1060F570C is another ESP32-S31 development kit with an integrated 7-inch touchscreen display. Some companies might reconsider the way they name their product… Leaving that aside, the GUITION devkit is especially interesting as it features a large 7-inch capacitive…

  3. M5Stack Chain Captain – An ESP32-S3 multifunctional controller with 1.54-inch color display, audio, motion sensing, IR Tx/Rx

    CNX Software Maker & DIY

    M5Stack Chain Captain is an ESP32-S3-based multifunctional programmable controller that features a 1.4-inch color square display, a speaker and microphone for audio interaction, motion sensing, and infrared transmission and reception. The IoT controller features 16MB SPI flash and 8MB on-chip PSRAM, Chain and Grove 4-pin ports, a 15-pin GPIO header, and seve…

  4. Timekettle LiveTalk review – Open-ear earbuds with real-time AI translation of videos, phone calls, face-to-face conversations

    CNX Software Maker & DIY

    We’ve received a review sample for the Timekettle LiveTalk, a pair of open-ear earbuds that supports real-time AI translation and AI-powered conversation summaries. It supports 53 languages and 107 accents, including 25 language pairs available offline. I’ll start with an unboxing, share my experience using the LiveTalk as standard earbuds, then focus on the…

  5. 19 Kasım Perşembe
  6. Waveshare ESP32-S31-Touch-LCD-4.3C – An ESP32-S31 4.3-inch display devkit with optional DIN rail case

    CNX Software Maker & DIY

    Last month we wrote about VIEWE’s ESP32-S31 4.3-inch touch display, but there’s now another option, namely the Waveshare ESP32-S31-Touch-LCD-4.3C development kit. Both models are similar, with an ESP32-S31 module equipped with 16MB flash and 16MB PSRAM, a 4.3-inch 800×480 touchscreen display, RS485 and CAN Bus interfaces, and more. The EVIEW model supports 1…

  7. Raspberry Pi SBCs get an open-source hardware I2C TPM 2.0 security module (Crowdfunding)

    CNX Software Maker & DIY

    ANAVI I2C TPM 2.0 is an open-source hardware I2C TPM 2.0 security module for Raspberry Pi single board computers based on the Infineon Optiga SLB 9673 TPM 2.0 chip. It’s an alternative to the earlier ANAVI TPM 2.0 module using an Optiga SLB 9672 SPI chip. The add-on board is designed for developers, hobbyists, and professionals who require enhanced security…

  8. EINSTAR EZ GO: Your First AI-Powered Mobile 3D Scanner (Sponsored)

    CNX Software Maker & DIY

    Start Here. Start Easy. For more than 20 years, SHINING 3D has been advancing high-precision 3D digitization, building deep technical expertise and a solid foundation in precision metrology. Through EINSTAR, this professional 3D technology has now entered a more accessible space—bringing trusted scanning capabilities closer to makers, 3D printing enthusiasts…

  9. SwitchBot Hub 4 Smart Home controller supports Matter 1.3, Hello Kata voice control, over 101,000 infrared devices

    CNX Software Maker & DIY

    SwitchBot Hub 4 is a Smart Home control hub with a color display, physical controls (buttons and know), Hello Kata voice control, WiFi and Bluetooth connectivity, and Matter Bridge 1.3 support. It supports over 101,000 infrared appliances, including air conditioners, televisions, projectors, fans, streaming devices (Fire TV, Apple TV, and Android TV), and mo…

  10. 18 Kasım Çarşamba
  11. Bluetooth 7.0 specification ratified with HDT (High Data Throughput) support

    CNX Software Maker & DIY

    The Bluetooth SIG ratified the Bluetooth 7.0 specification on November 3, 2026, with the highlight of the new Bluetooth Core specification being optional support for HDT (High Data Throughput), delivering up to 7.5 Mbps bitrate. We first covered HDT in 2025 when initial/early support was implemented into the Ceva-Waves Links200 multi-protocol platform IP, an…

  12. Web-based breadboard simulator lets you build circuits, fix errors, and monitor designs with a built-in oscilloscope

    CNX Software Maker & DIY

    Dev Kapadia’s de:volt is a breadboard simulator that runs in your browser. You can place parts and wires on a breadboard, and the circuit runs live the whole time as you build it. The project aims to be as close as a real breadboard would be. It reports errors and warnings, and you can monitor pins with its built-in oscilloscope and/or multimeter. For instan…

  13. Flipper One – A Rockchip RK3576-powered portable Arm Linux computer and networking multi-tool (Crowdfunding)

    CNX Software Maker & DIY

    Flipper Devices has launched the Flipper One open-source hardware portable Arm Linux platform and networking/Edge AI multi-tool powered by a Rockchip RK3576 octa-core Arm Cortex-A72/A53 SoC. It also features a Raspberry Pi RP2350 microcontroller for low-level control. You may think of it as a successor to the popular STM32-based Flipper Zero hardware and wir…

  14. 17 Kasım Salı
  15. Review of Seeed Studio 4.26″ Mono and 7.3″ Color e-paper Kit with OpenDisplay and Home Assistant

    CNX Software Maker & DIY

    Seeed Studio sent us two e-paper kits preloaded with OpenDisplay open-source firmware for review: the OpenDisplay 4.26″ Mono Kit and OpenDisplay 7.3″ Color Kit, both powered by a Nordic nRF52840 low-power Bluetooth LE microcontroller. This review focuses on practical use of the preinstalled OpenDisplay firmware: sending images from a browser, configuring the…

  16. 750 MHz GigaDevice GD32H7 Cortex-M7 MCU family gets up to 9.5MB Flash, EtherCAT for industrial applications

    CNX Software Maker & DIY

    GigaDevice adds new industrial parts to the GD32H7 series of Cortex-M7 MCUs, running at up to 750 MHz. The new lineup includes the GD32H77R for robotic joint control, GD32H78D/77D for industrial HMI applications, GD32H78E/77E for real-time motion control, and GD32H789/779 for general industrial automation. The MCUs feature up to 9728KB of on-chip Flash, 1152…

  17. Forlinx OK8275AA-C – A Qualcomm QCS8275 industrial SBC with 12GB LPDDR5, 256GB UFS storage

    CNX Software Maker & DIY

    Forlinx OK8275AA-C is an industrial-grade single board computer (SBC) based on the company’s FET8275AA-C SoM, powered by a Qualcomm Dragonwing QCS8275 SoC, delivering up to 40 TOPS for Edge AI workloads, and paired with 12GB LPDDR5 memory and 256GB UFS 3.1 storage. While it’s based on the same processor as the Arduino VENTUNO Q SBC, the Forlinx OK8275AA-C SB…

  18. Black Friday and Cyber Monday 2026 international deals and coupons

    CNX Software Maker & DIY

    As I do every year, I’ve gathered a list of relevant international deals for Black Friday and Cyber Monday 2026 since many CNX Software readers cannot benefit from promotions on Amazon’s Black Friday and Cyber Monday events starting today (November 20) and ending on November 30. The list includes deals, discount coupon codes, and events from relevant manufac…

  19. Rockchip RK3668 switches to Cortex-A725 and Cortex-A520 cores, engineering samples planned for Q1 2027

    CNX Software Maker & DIY

    More details have surfaced about the Rockchip RK3668 processor. The biggest change is that the Armv9 SoC will feature eight cores (6x Cortex-A725 and 2x Cortex-A520), rather than ten cores in a 4x Cortex-A730 + 6x Cortex-A530 configuration announced at its initial unveiling in July 2025. Mostly because the A730 and A530 cores have never been launched… We als…

  20. 16 Kasım Pazartesi
  21. GEEKOM A5 2027 Edition review – Part 2: A mid-range AMD Ryzen 7 7730U mini PC tested with Windows 11 Pro

    CNX Software Maker & DIY

    We’ve checked out the GEEKOM A5 2027 Edition mini PC’s hardware with an unboxing and teardown in the first part of the review, and we’ve now had time to test the AMD Ryzen 7 7730U mini PC in detail with Windows 11 Pro. In this article, we will test features, run benchmarks such as PCMark 10, 3DMark, and PassMark PerformanceTest 11, test YouTube 4K and 8K vid…

  22. Up to 35% discount on KAMRUI AMD Ryzen and Intel Core mini PCs (Sponsored)

    CNX Software Maker & DIY

    KAMRUI is offering up to a 35% discount on three of its AMD Ryzen 5/7 and Intel Core mini PCs. Let’s check all three. KAMRUI E3B mini PC – AMD Ryzen 5 PRO 7640HS, 24GB LPDDR5, 512 GB SSD This model features a 6-core/12-thread AMD Ryzen 5 PRO 7640HS Zen 4 processor clocked up to 5.0 GHz, paired with 24GB of soldered-on LPDDR5 memory, and a 512GB NVMe SSD inst…

  23. AAEON BOXER-8741AI industrial Edge AI box PC NVIDIA Jetson Thor T5000 with dual 10GbE and four 5GbE LAN

    CNX Software Maker & DIY

    AAEON BOXER-8741AI is an industrial edge AI box PC built around the NVIDIA Jetson Thor T5000 module, delivering up to 2070 FP4 TFLOPS (sparse) of AI performance and featuring 128GB LPDDR5X memory. Designed for humanoid robotics, autonomous mobile robots (AMRs), and multi-sensor perception workloads, it features two 10GbE and four 5GbE ports, two CAN FD inter…

  24. $69 Home Assistant Connect AUX-2 controller offers PoE, audio streaming, RS-232 control, Bluetooth proxy, and more

    CNX Software Maker & DIY

    Nabu Casa has launched the Home Assistant Connect AUX-2, an ESP32-S3-based smart home controller that combines audio streaming, RS-232 serial control, Bluetooth LE proxy, and USB expansion for Z-Wave connectivity. It is designed for older audio systems, TVs, AV receivers, UPSs, solar inverters, and other devices to integrate into Home Assistant without cloud…

  25. 15 Kasım Pazar
  26. Radxa Linkr review – A compact IP KVM with HTTPS, 2FA authentication, and Tailscale support

    CNX Software Maker & DIY

    We had a first look at the Radxa Linkr IP KVM in the first part of the review, checking out the specifications, the hardware design, and overall features at the end of August. That was at the end of August, and I didn’t have time to test it before I went on a two-month road trip. Since I’m now back, I’ve taken the time to test it using an AAEON UP Xtreme i11…

  27. 14 Kasım Cumartesi
  28. Desktop operating systems for ESP32-P4-based “PCs” – Meet Sylphide OS and Bare Metal, Do Stuff (BMDS)

    CNX Software Maker & DIY

    We’ve recently written about the P4 Launcher project that offers a desktop PC-like and/or retro-gaming experience to ESP32-P4 boards with applications stored on a microSD card and loaded into PSRAM when they run. However, I’ve recently been tipped about two new projects that go even further and aim to provide a desktop OS for microcontrollers, both currently…

  29. 13 Kasım Cuma
  30. Vantron unveils i.MX 952 SMARC system-on-module for Edge AI Vision and Industrial HMI at Electronica 2026

    CNX Software Maker & DIY

    Vantron has introduced the VT-SBC-SMARC-IMX952, an 82 × 50 mm SMARC 2.1 system-on-module (SoM) built around NXP’s i.MX 952 processor with two or four Arm Cortex-A55 cores, a Mali-G310 GPU, and a 2 TOPS eIQ Neutron NPU. The module is designed for industrial HMIs, edge AI vision, factory automation, in-cabin sensing, and other embedded applications. The module…

  31. Tektronix 1 Series low-cost DPO oscilloscopes support AI-assisted control, start at just $450

    CNX Software Maker & DIY

    Tektronix is better known for its high-end and pricey oscilloscopes, but has now introduced the 1 Series DPO, a line of low-cost digital phosphor oscilloscopes starting at just $450, with optional AI-assisted control through the new Tek Intelligence connector. These oscilloscopes are designed for electronics testing, embedded development, education, and ever…

  32. Revopoint Black Friday Sale Is Here — Save Up to 50% on 3D Scanners! (Sponsored)

    CNX Software Maker & DIY

    Revopoint’s Black Friday Sale is here, bringing major savings across its lineup of portable and industrial 3D scanners, accessories, and software. Whether you’re a 3D printing enthusiast, maker, designer, or industrial professional, this is a great opportunity to find the right scanning solution for your projects while enjoying discounts of up to 50%. Use co…

  33. Home Assistant-compatible ESP32 4-channel PWM fan controller is designed for server racks and NAS systems

    CNX Software Maker & DIY

    Designed by CoolMaker Lab in China, the ESP32 4-channel PWM fan controller is an open-source, Home Assistant-compatible board for managing cooling in server racks, NAS systems, network cabinets, and other DIY enclosures. It can independently control up to four 4-pin PWM fans, supporting PWM-based speed adjustment, tachometer-based RPM monitoring, and individ…

  34. 12 Kasım Perşembe
  35. VZMORE iX9 Max (U9-185H) mini PC review – Part 1: Specs, unboxing, teardown, and first boot

    CNX Software Maker & DIY

    VZMORE sent us a review sample of the iX9 Max mini PC powered by an Intel Core Ultra 9 185H 16-core/22-thread Meteor Lake processor clocked at up to 5.1 GHz, paired with 24 GB of LPDDR5-5600 memory and a 1 TB NVMe SSD. It supports up to four simultaneous displays via HDMI 2.0 and USB4 ports, offers six USB Type-A ports, two 40 Gbps USB4 ports, and two 2.5 Gb…

  36. HIYD ultrathin health tracker attaches to the back of regular watches (Crowdfunding)

    CNX Software Maker & DIY

    HIYD is a compact and thin (2.7mm) health and fitness tracker that attaches to the back of a regular wristwatch and looks very similar to the Azume One, which we wrote about last month. Developed by San Jose-based HIYD, the device adds heart rate, sleep, recovery, and activity tracking to traditional watches using a removable microsuction mechanism. It featu…

  37. WeAct Logic Analyzer V2 – A $10 USB 3.0 logic analyzer board compatible with Sigrok/Pulseview (fork)

    CNX Software Maker & DIY

    WeAct Studio Logic Analyzer V2 is a low-cost, small WCH CH32H417 board designed to be used as a 16-channel USB 3.0 logic analyzer with up to 200 MHz bandwidth. The company says the board runs three different “apps”: logic analyzer, USB-serial + DAP, or custom firmware developed by the user, all located at different addresses on the flash and selected by simp…

  38. Lumissil IS31CS9202/IS32CS9202 Cortex-M0+ MCUs integrate serial video bus (SBV), LumiBus, and capacitive touch-key controller

    CNX Software Maker & DIY

    Lumissil Microsystems IS31CS9202 and IS32CS9202 are 50 MHz Cortex-M0+ microcontrollers for industrial, consumer, and automotive applications with a serial video bus (SVB), a LumiBus LED controller, and a capacitive touch-key controller. Both chips come with 16KB RAM, 256KB flash, a CAN FD controller, SPI master/slave, I2C master/slave, two enhanced UART inte…

  39. 11 Kasım Çarşamba
  40. Mikrotik KNOT Gateway HL9 – An outdoor Wi-Fi HaLow IoT gateway with GbE, WiFi 6, BLE 5.1, 4G LTE Cat 1 bis, and GNSS

    CNX Software Maker & DIY

    MikroTik KNOT Gateway HL9 is an IP66-rated outdoor IoT gateway that combines 915 MHz Wi-Fi HaLow (802.11ah), Bluetooth 5.1, Wi-Fi 6, LTE Cat 1 bis, Gigabit Ethernet, and GNSS. The gateway supports asset tracking, remote sensor monitoring, industrial IoT, and agricultural applications. Built around a dual-core Qualcomm IPQ-5010 ARM64 processor, it features 25…

  41. Arduino Nano XL board features Microchip PIC32CK Cortex-M33 MCU for industrial, home, and building automation

    CNX Software Maker & DIY

    Arduino Nano XL Link is an evolution of the popular Arduino Nano board, with the same dimensions, but featuring a more powerful Microchip PIC32CK Arm Cortex-M33 running at 120 MHz with 2 MB of flash and 512 kB of RAM. It also adds CAN FD, RS485, and 10/100 Mbps Ethernet field bus transceivers for industrial, home, and building automation applications such as…

  42. Renesas RZ/T2N Cortex-A55/R52 industrial MPU supports four-axis motor control, TSN Ethernet, EtherCAT…

    CNX Software Maker & DIY

    Renesas RZ/T2N industrial MPU supports up to four-axis motor control and includes PWM timers, encoder interfaces, and trigonometric accelerators. It’s designed for industrial robots, programmable logic controllers (PLCs), motion controllers, and multi-axis servo drives. The MPU features up to two 1.2 GHz Arm Cortex-A55 cores for application processing and tw…

  43. LocalDot – Open-source PCB for 3rd-gen Amazon Echo Dot enables Home Assistant support (Crowdfunding)

    CNX Software Maker & DIY

    AAElectronics’ LocalDot is an open-source replacement mainboard that converts a 3rd-generation Amazon Echo Dot into a local voice assistant compatible with Home Assistant. The board replaces one of the two original PCBs while reusing the existing microphones, speaker, buttons, LEDs, and enclosure, so the device works without relying on Amazon’s cloud service…

  44. 10 Kasım Salı
  45. LabWired allows engineers to test compiled firmware on simulated MCU boards (CPU and peripherals)

    CNX Software Maker & DIY

    Andrii Shylenko’s LabWired is an MIT-licensed MCU firmware simulation core that runs compiled firmware against modeled CPUs and peripherals, captures UART and bus output, register state, and supports repeatable checks in CI. The simulator works on Arm Cortex-M0+, Cortex-M3, Cortex-M4, Cortex-M7, Cortex-M33 cores, RISC-V architecutre, and Xtensa LX6 and LX7 (…

  46. KiCad 10 now (unofficially) runs in a web browser or Android

    CNX Software Maker & DIY

    It’s now possible to run KiCad 10 directly in a web browser or as an Android app thanks to two separate open-source projects, unaffiliated with the official KiCad project. Let’s have a look at both. Ziro Designer/ZiroEDA – KiCad 10 in your web browser Akshay Rukade (ZiroEDA), an engineering student in India, ported KiCad 10.0.6 to the browser through the Zir…

  47. ControlBox Home Assistant solution is designed for floor heating systems, house lighting, 1-wire sensors (Crowdfunding)

    CNX Software Maker & DIY

    DomeCtrl’s ControlBox is a Raspberry Pi 5-based controller running Home Assistant and primarily designed for hydronic radiant floor heating (RFH) systems. It also supports lighting solutions and integration with energy devices such as solar collectors, photovoltaic installations, heat pumps, hydraulic pumps & valves. The system controls thermal valves, hydra…

  48. 280 MHz STMicro STM32G5 Cortex-M33 mixed-signal MCU targets digital power and motor control applications

    CNX Software Maker & DIY

    The STM32G5 series is a family of 280 MHz Arm Cortex-M33 mixed-signal MCUs designed for industrial power supplies, photovoltaic inverters, EV chargers, robotics, and motor control systems. It doubles the performance of the older STM32G4 series unveiled in 2021. The new MCU family features up to 512KB flash, 112KB SRAM with ECC, a 111 ps high-resolution timer…

  49. 9 Kasım Pazartesi
  50. Seeed Studio XIAO STM32C5 development board features dual CAN FD and a 6-axis IMU with programmable heating

    CNX Software Maker & DIY

    Seeed Studio XIAO STM32C5 is the company’s first XIAO development board based on an STMicroelectronics MCU, namely a 144 MHz STM32C5A3CG Arm Cortex-M33 microcontroller. It features two CAN FD controllers and a 6-axis IMU with programmable heating for robotics, industrial control, and motion-sensing applications. The board also includes 16MB of external flash…

  51. SparkFun IoT RedBoard ESP32-P4 – Arduino UNO-like ESP32-P4 v3.x development boards with WiFi 6 or PoE options

    CNX Software Maker & DIY

    SparkFun introduced two new development boards called IoT RedBoard, both based on the ESP32-P4 v3.x (ESP32-P4X) and compatible with the Arduino UNO R3 form factor. The main difference is that one features an ESP32-C5 for Wi-Fi 6, Bluetooth 5 LE, Zigbee, and Thread connectivity, while the PoE version includes 10/100 Mbps Ethernet and Power over Ethernet (PoE)…

  52. Black Friday Deal: Over $200 Off the VZMORE AX9 Max Mini PC! (Sponsored)

    CNX Software Maker & DIY

    Mini PC manufacturer VZMORE has launched an early Black Friday deal for its AMD Ryzen AI 9 HX 470-powered VZMORE AX9 Max model: $229 off, bringing the regular price down to $1,270 from $1,499. The VZMORE AX9 Max mini PC ships with 32GB DDR5 and a 1TB NVMe SSD preloaded with Windows 11 Pro. It features four video outputs (2x HDMI 2.1, 2x USB-C) , a 3.5mm audi…

Klavye kısayolları

j k
Sonraki, önceki haber
o Enter
Haberi yeni sekmede aç
s
Kaydet ya da kayıttan çıkar
/
Aramaya geç
c
Sade görünümü aç, kapat
?
Bu pencere